The Adapter (41 +60 seals)

  • Brand   
  • Type   The Adapter (41 +60 seals)
  • Inquire Now
Introduction

The Adapter (41 +60 seals)

The adapter (41 +60 seals)

41 and four three joints of stainless steel, a total of 45 pieces, covering the pressure gauge calibration using more than 99%.

With M20 x 1.5 outer thread switching the following kinds of thread, specifications, quantity as follows:

M10 * 1 (external) screw 1 pieces of each;

M12 * 1 (external) screw 1 pieces of each;

M12 * 1.25 (external) screw 1 pieces of each;

M14 * 1.5 (external) screw 1 pieces of each;

M16 * 1.5 (external) screw 1 pieces of each;

M20 * 1.5 (external) screw 1 pieces of each;

1 / 8NPT (external) screw 1 pieces of each;

1 / 4NPT (external) screw 1 pieces of each;

1 / 2NPT (external) screw 1 pieces of each;

3 / 8NPT (external) screw 1 pieces of each;

G1 / 8 (external) screw 1 pieces of each;

G1 / 4 (external) screw 1 pieces of each;

G1 / 2 (external) screw 1 pieces of each;

G3 / 8 (external) screw 1 pieces of each;

ZG1 / 8 (external) screw 1 pieces of each;

ZG1 / 4 (external) screw 1 pieces of each;

ZG1 / 2 (external) screw 1 pieces of each;

ZG3 / 8 (external) screw 1 pieces of each;

Axial table check special angle transition joint 1;

M20 * 1.5 internal and external threads, pluggable connectors 1;

Crow's feet joint (barb) phi 6, Phi 8 each 1 pieces;

Rubber pad 20;

PTFE gasket 20;

The three through 4;

"O" ring 20.

More Products